Theft Indicator; Programming Spare Securilock Keys; Procedure To Program Spare Securilock Keys To Your Vehicle - Ford 1998 Expedition Owner's Manual

Controls and features

Theft indicator

The theft indicator on top of the instrument panel will operate as
follows:
When the ignition is OFF, the theft indicator will flash briefly every 2
seconds to indicate the SecuriLock
vehicle.
When the ignition is turned to ON or START, the theft indicator will
light for 3 seconds and then go out. If the theft indicator stays on for
an extended period of time or flashes rapidly, have the system
serviced by your dealership or a qualified technician.
Programming spare SecuriLock
Spare SecuriLock
programmed to your SecuriLock
keys). Your dealership can program your new SecuriLock
your vehicle or you can do it yourself using the following simple
procedure. To program a new SecuriLock
two previously programmed SecuriLock
operate your vehicle's engine). If two previously programmed
SecuriLock keys are not available (one or both of your original keys
were lost or stolen), you must bring your vehicle to your dealership to
have the spare SecuriLock
Procedure to program spare SecuriLock
New SecuriLock
your vehicle.
Conventional (non-SecuriLock ) keys cannot be programmed to your
vehicle.
You will need to have two previously programmed SecuriLock
the new unprogrammed SecuriLock
implementation of each step in the procedure. Please read and
understand the entire procedure before you begin.
1. Insert the first previously programmed SecuriLock
ignition and turn the ignition from OFF to RUN (maintain ignition in
RUN for at least one second).
2. Turn ignition to OFF and remove the first SecuriLock
ignition.
66
keys can be purchased from your dealership and
key(s) programmed.
keys must have the correct mechanical key cut for
system is protecting your
keys
anti-theft system (up to a total of 8
key yourself, you will need
keys (keys that already
keys to your vehicle
key readily accessible for timely
key(s) to
keys and
key into the
key from the