Advertisement
5. Getting to Know the AV receiver
Front Panel
Each input selector button (BD/DVD, GAME, etc.) selects the input terminal with the same name on the rear panel.
Note that these default assignments can be changed. For details, please refer to the instruction manual.
a Sets the AV receiver to On or Standby.
b Lights when the HDMI through function is enabled.
c You can use two sets of front speakers with the AV receiver:
Speakers A for up to 5.1-channel playback in your main
listening room and Speakers B for 2-channel stereo playback
in another room.
d The remote control sensor receives signals from the
remote controller.
e Selects listening modes.
f Displays various information.
g RT/PTY/TP: Used for RDS (Radio Data System)
RDS works only in areas where RDS broadcasts are available.
h Stores or deletes radio presets.
i Selects the Auto or Manual tuning mode.
j Displays various information about the currently selected
input source.
k Accesses the setup menus.
l When the AM or FM input source is selected, w TUNING q are
used to tune the tuner, and e PRESET r are used to select
radio presets.
When used with onscreen menus, they work as cursor buttons
to select and set items. ENTER is also used with
onscreen menus.
m Returns to the previous menu.
n.Adjusts the volume.
o The Music Optimizer function enhances the sound quality of
compressed music files.
p Connects a standard pair of stereo headphones.
q Adjusts the tone.
r Selects the input sources.
s Connects a camcorder or similar for audio/video playback.
- 7 -
Remote Controller
Tel: 072-831-8023
http://www.onkyo.com/
Tel: 800-229-1687, 201-785-2600
http://www.us.onkyo.com/
Tel: +49-8142-4401-0
http://www.eu.onkyo.com/
To control the AV receiver, press RECEIVER to select
Receiver mode.
Sets the AV receiver to On or Standby.
a.
b.
Selects the remote controller modes or the input sources.
c.
Adjust the bass and treble.
Selecting Speakers A and B.
d.
Selects and adjusts settings.
e.
Accesses the setup menus.
f.
Selects listening modes.
g.
h.
Adjusts the display brightness.
i.
Displays various information about the currently selected input
source.
Mutes or unmutes the AV receiver.
j.
Adjusts the volume.
k.
Returns to the previous menu.
l.
m.
Accesses the HOME menu.
n.
Used for the Sleep function.
6. Troubleshooting
Can't turn on the AV receiver.
Make sure that the power cord is properly plugged into the wall outlet.
The AV receiver turns off unexpectedly.
The AV receiver will automatically enter standby mode when Auto Standby is set
and launched.
There's no sound, or it's very quiet.
Make sure that the proper digital source is selected.
There's no picture.
Make sure that all video connecting plugs are pushed in all the way.
If you can't resolve the issue yourself, try resetting the AV receiver before
contacting your Onkyo dealer.
To reset the AV receiver to its factory defaults, turn it on and, while holding down
VCR/DVR, press 8 ON/STANDBY. "Clear" will appear on the AV receiver's
display and the AV receiver will enter standby mode.
Note that resetting the AV receiver will delete your radio presets and custom
settings.
Tel: +44-(0)1628-473-350
Tel: 852-2429-3118
http://www.onkyochina.com/
Tel: 86-21-52131366
http://www.cn.onkyo.com/
Advertisement
