Displaying Mp3 Information - Onkyo CR-535 Instruction Manual

Playing CDs—Continued
Playing the MP3 Files in Only One Folder
/
Normally, all of the MP3 files in all of the folders on the
disc are played. With 1-folder playback, only the MP3
files in the specified folder are played.
1
Press the [YES/MODE] button
repeatedly until the 1FOLDER
indicator appears.
2 Use the Previous and Next
[ ]/[
folder.
You can select any folder that contains
MP3 files.
3 To start playback, press the
[ENTER] or Play [
Playback will start with the first MP3
file in the specified folder and continue
until all of the MP3 files in that folder
have been played.

Displaying MP3 Information

You can display various information about the MP3 file
currently playing, including ID3 tags such as title, artist
name, and album name.
During playback, press the [DIS-
PLAY] button repeatedly to dis-
play the following MP3
information.
DISPLAY
YES/MODE
ENTER
1FOLDER indicator
] buttons to select the
] button.
Elapsed time:
The length of time that the current MP3 file has been
playing (default display). If the elapsed time is more
than 99 minutes and 59 seconds, "– –:– –" is dis-
played.
File name:
Name of the current MP3 file.
Folder name:
Name of the current folder.
Title name:
Title of the current file (if ID3 tag present).
Artist name:
Name of the artist (if ID3 tag present).
Album name:
Name of the album (if ID3 tag present).
Sampling rate and bit rate:
Sampling rate and bit rate of the current MP3 file.
Notes:
• You can also use the CD receiver's [DISPLAY] button
to display this information.
• To display the disc name, press the [DISPLAY] button
while playback is stopped.
• If a file or folder name contains any characters that
cannot be displayed, an underscore will be displayed
in place of those characters. Alternatively, you can set
the CD receiver so that names containing such charac-
ters are displayed as "File_n" or "Folder_n", "n"
being the file or folder number (see page 34).
31