Onkyo CR-535 Instruction Manual page 13

Getting to Know the CD receiver—Continued
Controlling an Onkyo MD recorder, cassette deck, or RI Dock
Explanation of buttons for using the Onkyo MD recorder, cassette deck, or RI Dock, when connected to the
MD/TAPE jack or DOCK IN jack of the CD receiver.
• See pages 20-22 for instructions on connecting the components.
• To control the MD recorder, the Input Display for the MD/TAPE jacks must be set to "MD" (see page 26).
1
2
3
4
5
Button
MENU/NO/CLEAR
DOCK
DOCK
DOCK
MD/TAPE
MD/TAPE
MD/TAPE
DISPLAY
YES/MODE/SHUFFLE
*1. In "Cursor Mode" it works as a MENU button.
*2. In "Cursor Mode" it can be used for navigation menus.
• Refer to the instruction manual for each connected component for details. For column items with no notation: buttons
will not function when pressed.
6
7
8
9
bk
Jack
Input source
1 ~ 9
0
>10
ENTER
( )
REPEAT REV MODE
DOLBY NR
/
/
Example: Shows the case of
the [YES/MODE/SHUFFLE] button.
• When the cassette deck is connected to the MD/TAPE
jack of the CD receiver and the input source is set to
"TAPE", it works as a DOLBY NR button.
MD/TAPE
TAPE MD
1 ~ 9
10/0
>10
CLEAR
ENTER
DISPLAY
REPEAT
MODE
/ /
/
:
DOCK
DOCK
MODE
SELECT
BACKLIGHT
REPEAT
*1
SHUFFLE
*2
/
/
13