Onkyo BD-SP808 Instruction Manual page 42

S
Video
• For how to select the setting items and options, refer to "Custom" on page 40.
Setting items
TV Aspect
Sets the picture size according to
aspect ratio of the connected TV.
HDMI Select
Select an HDMI output mode
between "YCbCr" and "RGB".
For optimal video performance, THX
recommends the following settings:
"HDMI Select"="YCbCr"
HDMI RGB Setting
Sets the digital RGB image range
(data range) output from the HDMI
OUT jack.
HDMI Auto Format
Makes the setting of the "Auto" for
"HDMI Video Resolution".
FUN
HDMI Video Resolution
Sets the HDMI video resolution.
42
FUNCTION SETUP
Video
TV Aspect 16:9 Wide
HDMI Select YCbCr
HDMI RGB Setting Normal
HDMI Auto Format Max
HDMI Video Resolution Auto
HDMI Deep Color Auto
Component Output 480i/576i
16:9 Wide*:
Select this when a wide-screen TV is connected. Discs recorded in wide-screen
format is played back over the entire TV screen.
4:3 Pan & Scan:
Select this to play back the discs recorded in wide-screen format with 4:3 TV in
the pan & scan mode (with the sides of the picture cut off). Discs which are not
specified for pan & scan are played back in the letter box mode.
4:3 Letter Box:
Select this to play back the discs recorded in wide-screen format with 4:3 TV in
the letter box mode. (with black strips at the top and bottom).
16:9 Squeeze:
When playing back 4:3 images, the picture is displayed in the centre of the 16:9
screen with a 4:3 aspect ratio.
YCbCr*:
Component format video signals and audio signals are output from the HDMI
OUT jack.
RGB:
RGB format video signals and audio signals are output from the HDMI OUT jack.
Normal*:
Output as "16 (black)" to "235 (white)".
Enhanced:
Output as "0 (black)" to "255 (white)".
Depending on the display device you are using, the black colours may seem to
stand out when using HDMI connections. If so, set to "Enhanced".
Max*:
The maximum resolution that can be input to the connected HDMI device is
detected and the HDMI output resolution is selected automatically.
Panel:
The number of pixels of the connected HDMI device's panel is detected and the
HDMI output resolution is selected automatically.
*1 Auto*:
HDMI video resolution will be selected automatically depending on the
connected HDMI device.
Source Direct:
HDMI video resolution will be set to the recorded resolution of a playback
media.
480i/576i
480p/576p
720p
1080i
1080p
1080p24:
Gives a natural and high quality film reproduction of 24-frame film material. The
connected TV has to be compatible with 1080p24 frame input.
Options
EN