Onkyo BD-SP808 Instruction Manual page 15

HDMI Output Mode and Actual Output Signals
Press [RESOLUTION] to change the resolution of the video signal being output from HDMI OUT jack. The video
resolution changes as follows every time [RESOLUTION] is pressed.
*1
Front Panel
Display
HDMI Video 480/576
Resolution Interlaced
Copyright protection system
To play back the digital video images of a BD / DVD via an HDMI connection, it is necessary that both the unit and the TV
(or an AV receiver) support a copyright protection system called HDCP (high-bandwidth digital content protection system).
HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This
unit supports HDCP. Please read the operating instructions of your TV (or AV receiver) for more information.
*1)
"480i" and "480p" will be displayed only when an NTSC disc or a1080p24 frame material is being played back.
*2)
Even if "HDMI Video Resolution" is set to "Source Direct", HDMI video resolution will be changed when your TV is not
compatible with the video resolution of a disc material.
Note
• When using HDCP-incompatible TV, the image will not be viewed properly.
• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length)
maybe limited by the device that is connected.
• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In connections with
device such as this unit, audio signals are not output from HDMI OUT jack.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.
• You can also change the HDMI output mode from "HDMI Video Resolution" setting in "Video" menu. In this menu,
you can confirm what HDMI video resolutions are supported by connected TV. Refer to page 42.
• You can change the HDMI output mode with [RESOLUTION] during playback as well. (This is not available during
BD/AVCHD playback.)
• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI cable (High Speed
HDMI cable is recommended) and select "1080p24", "Auto" or "Source Direct" if the connected display device is
compatible with 1080p24 frame input.
• If the disc contains 1080p24 frame material, 60-frame or 50-frame image will be output unless "1080p24" is selected.
• For AVCHD and DivX , 24-frame film material will be output as 60 frame, even if the connected device is
®
compatible with 1080p24 frame input and "HDMI Video Resolution" is set to "1080p24", "Auto" or "Source Direct".
• When "HDMI Video Resolution" is set to "1080p", "1080p24" or "Source Direct", the "Component Output" will be set
to "480i/576i" automatically.
• If the video is not properly from HDMI OUT jack after you set the "HDMI Video Resolution" setting, change the
HDMI video resolution to the compatible resolution by pressing [RESOLUTION] or press and hold [B (play)] on
the front panel for more than 5 seconds to reset the setting.
• "HDMI Deep Color" is available only when the display device is connected by HDMI cable and supports HDMI Deep Color.
• For "Auto" in "HDMI Deep Color", using the High Speed HDMI cable is recommended.
HDMI Audio Setting
When using HDMI connections make "HDMI Audio Out" setting in "Audio" menu according to the specifications of the
device to be connected. Refer to page 44.
Device to be connected
Device compatible with Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS or DTS-HD
decoding
Device compatible with 3 or more channels of
audio inputs (not Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS or DTS-HD compatible)
Device compatible with 2-channel audio input
or device not compatible with audio input
HDMI connection to a TV, and digital audio
connection (coaxial/optical) to an AV amplifier
EN
CONNECTIONS
*1
B B
480/576 720
Progressive Progressive
"HDMI Audio Out" setting
HDMI Multi(Normal)
HDMI Multi(LPCM)
HDMI 2ch
Audio Mute
B B
1080 1080
Interlaced Progressive
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD bitstream are output from
HDMI OUT jack. Make the speaker settings on
the connected AV amplifier, etc.
Multi-channel audio signals are output from
HDMI OUT jack. Make the speaker settings with
the speaker setting items appear after you
select "HDMI Multi(LPCM)". Refer to page 44.
Down-mixed 2-channel audio signals are
output from HDMI OUT jack.
HDMI audio will be muted, and Dolby Digital / DTS
bitstream or LPCM will be output from AUDIO OUTPUT
(DIGITAL OPTICAL/COAXIAL) jacks depending on
"Digital Out" setting. Refer to page 45.
*2
B B
1080
Progressive 24 Source Direct
frame
Output HDMI audio signal
*2
15