Opening Screen - Onkyo BD-SP808 Instruction Manual

Installing the Batteries in the Remote Control
Install 2 R6 (1.5V) batteries matching the polarity indicated
inside battery compartment of the remote control.
1) Open the cover.
2) Insert batteries.
Make sure to match + and ] on the batteries to the
marks indicated in the battery compartment.
3) Close the cover.
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the
following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
12
FUNCTION OVERVIEW
Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
• Remote operation may become unreliable if strong
• Remote control for different devices can interfere with
• Replace the batteries when you notice a fall off in the
• The maximum operable ranges from the unit are as

Opening Screen

In stop mode and "Mode Select" is set to "Network",
opening screen is displayed.
"Home Network": To access the list of DLNA home server
remote control and the infrared sensor window on the
unit.
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
each other. Avoid using remote control for other device
located close to the unit.
operating range of the remote control.
follows.
Infrared sensor window
30˚
30˚
BD-SP808
Home Network
EN