HP 53131A Operating Manual page 152

Table 2-5. Menu Messages (continued)
Display Message
OFFS 2 FAIL
OFFS 2 PASS
NO GATE MENU
NO LIM MENU
NO MATH MENU
NO REGISTERS
NO STAT MENU
NO TRIG MENU
1
RECALL FAIL
1
SAVE FAIL
TB CAL FAIL
TB CAL PASS
TI CAL FAIL
TI CAL PASS
Chapter 2 Operating Your Universal Counter
Front Panel Display Messages
Description
You have invoked the OFFS 2 ? choice from the Calibration menu item CAL: ,
and the calibration failed.
You have invoked the OFFS 2 ? choice from the Calibration menu item CAL: ,
and the calibration passed.
You currently have the VOLT PEAKS function selected and requested the Gate &
Ext Arm menu.
You currently have the VOLT PEAKS or TOTALIZE function selected and
requested the Upper & Lower or Limit Modes menu.
You currently have the VOLT PEAKS or TOTALIZE function selected and
requested the Scale & Offset menu.
There are no registers which can be recalled and you selected the Recall menu.
You currently have the VOLT PEAKS or TOTALIZE function selected and
requested the Stats menu.
You currently have the VOLT PEAKS function selected and requested the
Trigger/Sensitivity menu.
You have requested the Counter to perform a recall (from the Recall menu) and a
hardware failure has resulted.
You have requested the Counter to perform a save (from the Save & Print menu)
and a hardware failure has resulted.
You have invoked the TIMEBAS? choice from the Calibration menu item CAL: ,
and the calibration failed.
You have invoked the TIMEBAS? choice from the Calibration menu item CAL: ,
and the calibration passed.
You have invoked the TI QUIK? or TI FINE? choice from the Calibration menu
item CAL: , and the calibration failed.
You have invoked the TI QUIK? or TI FINE? choice from the Calibration menu
item CAL: , and the calibration passed.
1
If this condition recurs, your Counter may need servicing.
2-76 Operating Guide