Menu Messages - HP 53131A Operating Manual

Table 2-5. Menu Messages
Display Message
(AC COUPLED)
BAD CODE
CAL ABORTED
CAL SECURE
CAL UNSECURE
CALIBRATING
1
EEPROM FAIL
GAIN 1 FAIL
GAIN 1 PASS
GAIN 2 FAIL
GAIN 2 PASS
IN REMOTE
LOCAL LCKOUT
OFFS 1 FAIL
OFFS 1 PASS
Chapter 2 Operating Your Universal Counter
Front Panel Display Messages

Menu Messages

Description
You have selected the VOLT PEAKS function to be measured on a channel which
is ac coupled.
The Counter's calibration is secured and you have entered an incorrect code.
Calibration was aborted because of HP-IB or the user pressing a key besides the
Enter key.
You are in the Calibration menu, and the first menu item indicates that the
Counter is secure against calibration.
You are in the Calibration menu, and the first menu item indicates that the
Counter is unsecure for calibration.
You have invoked calibration from the Calibration menu item CAL: , and the
Counter is currently performing the calibration.
You have requested that a Counter setting which is stored in the EEPROM
( HP-IB: , BAUD: , PARITY: , SW PACE: , DTR: , SHOW 9 AS: , or CAL: ) be
updated, and a hardware failure has resulted.
You have invoked the GAIN 1 ? choice from the Calibration menu item CAL: , and
the calibration failed.
You have invoked the GAIN 1 ? choice from the Calibration menu item CAL: , and
the calibration passed.
You have invoked the GAIN 2 ? choice from the Calibration menu item CAL: , and
the calibration failed.
You have invoked the GAIN 2 ? choice from the Calibration menu item CAL: , and
the calibration passed.
You have pressed a key (other than Local) while in remote.
You have pressed the Local (Save & Print) key while in remote with local lockout.
You have invoked the OFFS 1 ? choice from the Calibration menu item CAL: ,
and the calibration failed.
You have invoked the OFFS 1 ? choice from the Calibration menu item CAL: ,
and the calibration passed.
Operating Guide 2-75