Nokia E70 User Manual page 92

The settings available for editing may vary.
WPA security settings
Select Menu Tools
>
points. Select Options
access point and Options
In the access point settings, select
mode > WPA/WPA2.
Select WLAN security
WPA mode — Select
•
Protocol) or Pre-shared key
device identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device
to use with the access point.
Pre-shared key — If you select
•
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
TKIP encryption
•
on transient keys changed often enough to prevent
misuse, select Allowed. All devices in the wireless
LAN must either allow or prevent the use of TKIP
encryption.
The settings available for editing may vary.
EAP
To view the EAP (extensible authentication protocol)
plug-ins currently installed in your device (network
service), select Menu
Access points. Select
define an access point that uses wireless LAN as a data
bearer and 802.1x or
92
Settings Connection
> > >
New access point, or select an
>
> Edit.
WLAN security
sett.. and from the following:
EAP (Extensible Authentication
(a secret key used for
— If you select WPA mode
WPA mode
— To enable TKIP encryption, based
Tools Settings Connection
> > >
Options New access point
>
WPA/WPA2 as their security mode.
Select WLAN security sett.
EAP plug-in settings, and press the joystick.
EAP settings
Access
Select Menu
>
points. Select
access point and
Select WLAN security mode
Select WLAN security sett.
EAP plug-in settings, and press the joystick.
The extensible authentication protocol (EAP) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
>
EAP plug-ins make possible the use of various EAP
methods (network service).
Pre-
To use an EAP plug-in when you connect to a WLAN
>
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use with
this access point have a check mark next to them. To
not use a plug-in, select
To edit the EAP plug-in settings, select
Configure.
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
before other plug-ins when connecting to the network
with the access point, or
this plug-in for network authentication after
attempting to use other plug-ins.
>
The available options may vary.
and
See the device help for more information on EAP
plugins.
WPA mode > EAP, scroll to
>
Tools Settings Connection
> >
Options New access point, or select an
>
Options > Edit.
802.1x or WPA/WPA2.
>
WPA mode > EAP, scroll to
>
Options > Disable.
Options
to attempt to use the plug-in
Options Lower priority
>
Access
>
>
to use