Device Security - Nokia E70 User Manual

Preferred profile
Select Menu Connect. Internet tel.
> >
settings.
Before you can select the default profile, you must
create profiles in Menu Tools
>
Connection Internet tel.
>
To select the profile that is used by default when you
make net calls, select Preferred
joystick. Scroll to the desired profile, and press the
joystick.
Register profiles
Only those profiles where you have selected
Registration When needed
>
Settings Connection Internet tel. settings
> >
in the list.
To change the registration of your net telephone
profiles, scroll to the profile that you want to register
or unregister, and press the joystick. Press the joystick
again to select Registered
To save your settings, select Back.

Device security

Select Menu Tools Settings
> >
SIM.
You can modify the security settings for the PIN code,
automatic lock, and SIM card change, and change codes
and passwords.
to change
Settings
> >
settings.
profile, and press the
setting in Menu Tools
>
are shown
or Not registered.
Security Phone and
> >
Avoid using codes that are similar to emergency
numbers to prevent accidental dialing of the
emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Define security settings
To define device and SIM card settings, select a setting
and Options > Change.
When calls are limited to closed user groups, calls may
be possible to the official emergency number
programmed into your device.
Define the following settings:
PIN code request — Select
>
•
code is entered each time the device is switched on.
This setting cannot be changed if the device is
switched off. Some SIM cards do not allow turning
off the PIN code request.
PIN code — Change the PIN code. The PIN code must
•
be 4 to 8 numbers long. The PIN code protects your
SIM card against unauthorized use and is provided
with the SIM card. After three consecutive incorrect
PIN code entries, the PIN code is blocked, and you
need to use the PUK code to unblock it before you
can use the SIM card again.
PIN2 code — Change the PIN2 code. The PIN2 code
•
must be 4 to 8 numbers long. The PIN2 code is
required to access some functions of the device and
is provided with the SIM card. After three consecutive
incorrect PIN2 code entries, the PIN2 code is blocked,
and you need to use the PUK2 code to unblock it
before you can use the SIM card again.
On to request that the PIN
33