Nokia 3250 User Manual page 92

To interrupt the search, select
Stop. The device list freezes and
you can start to form a
connection to one of the devices
already found.
4. When searching for devices,
some devices may show only the
unique device addresses. To find
out the unique address of your
phone, enter the code *#2820#
in the standby mode.
If you have searched for devices
earlier, a list of the devices that
were found previously is shown
first. To start a new search, select
More devices. If you switch off
the phone, the list of devices is
cleared and the device search
needs to be started again before
sending data.
5. Scroll to the device you want to
connect with, and select it. The
item you are sending is copied to
the outbox, and the note
Connecting is shown.
6. Pairing (if not required by the
other device, go to step 7.)
• If the other device requires
pairing before data can be
transmitted, a tone sounds
and you are asked to enter a
passcode.
• Create your own passcode
(1-16 characters long,
numeric) and agree with the
Copyright © 2006 Nokia. All rights reserved.
owner of the other device to
use the same code. This
passcode is used only once
and you do not have to
memorize it.
• After pairing, the device is
saved to the
view.
7. When the connection has been
successfully established, the note
Sending data is shown.
Data received using Bluetooth
connection can be found in the
Inbox folder in Messag..
Icons for different devices:
(Computer),
(Audio/video), and
device).
If sending fails, the message or data
are deleted. The Drafts
Messag. does not store messages
sent using a Bluetooth connection.
Paired devices view
Paired devices are indicated by
the search result list. In the
Bluetooth main view, scroll right to
open a list of paired devices.
Do not accept Bluetooth
connections from sources you do not
trust.
To pair with a device, select
Options > New paired
phone starts a device search. Scroll
C o n n e c t i v i t y
Paired devices
(Phone),
(Bluetooth
folder in
in
device. The
81