Nokia 3250 User Manual page 65

M y o w n
Select Options and from the
following:
Hold peak — The peak value is held in
the measured maximum until you
exit the application.
Weighting options — Select A
weighting to simulate the ear in a
noisy environment, C weighting to
simulate the ear in a quiet
environment, or Off to measure
without a weighting algorithm.
Dynamic peak — The current peak
value is kept for 5 sec.
Reset peak — The current peak value
is reset.
If the peak or current value is higher
than 114 dB or lower than 50 dB a >
or < character is shown before the
value.
54 Copyright © 2006 Nokia. All rights reserved.