Nokia 3250 User Manual page 78

connection, an access point is
required. You can define different
kinds of access points:
• MMS access point to send and
receive multimedia messages
• Access point for the Web
application to view WML or
XHTML pages
• Internet access point (IAP)
(for example, to send and receive
e-mail)
Check which kind of access point
you need with your service provider
for the service you wish to access.
For availability and subscription to
packet data connection services,
contact your network operator or
service provider.
Receive access point settings
You may receive access point
settings in a message from your
service provider, or you may have
preset access point settings in your
phone.
Access points
To create a new access point or edit
an existing access point, select
Menu > Tools > Settings
Connection > Access points
Options > New access point
If you create a new access point, use
the settings of an existing access
point as a basis by selecting
existing settings, or start with
Copyright © 2006 Nokia. All rights reserved.
default settings by selecting
default
Follow the instructions from your
network operator or service provider.
Connection name
descriptive name for the connection.
Data bearer
data,
(GSM). Depending on what data
connection you select, only certain
setting fields are available. Fill in all
fields marked with
or with an asterisk. Other fields can
be left empty, unless you have been
instructed otherwise by your service
provider.
To be able to use a data connection,
the network operator or service
provider must support this feature,
and if necessary, activate it for your
SIM card.
Access point name
only) — The access point name is
needed to establish a connection to
the GPRS network. You obtain the
access point name from your
network operator or service provider.
Dial-up number
>
the modem telephone number of the
>
access point.
or Edit.
User name
needed to make a data connection
and is usually provided by the service
Use
provider. The user name is often
case-sensitive.
settings.
— to give a
— The options are
Data call, and High speed
Must be
(for packet data
(for data call only) —
— The user name may be
T o o l s
Use
Packet
defined,
67