Table of Contents
Advertisement
DS3
Access the DS3's diagnostic options by selecting 1 from the main
D
IAGNOSTICS
Data Mode
Ends a test already in progress for this port.
DS3 Payload Loopback
During this test, all payload information is re-framed and looped
back towards the network. See Figure 6-3 on page 96 for a block
diagram illustrating the loopback point and the signal paths for this
test.
This test does not interrupt data flow from the network to the DTE,
but it does block all DTE-to-network data.
61202217L1-1B
menu. The menu in Figure 6-2 appears.
Figure 6-2. DS3 Diagnostics Menu
T3SU 300 User Manual
Chapter 6. Diagnostics
95
Advertisement
Table of Contents
