Table 3-1. Hssi And V.35 Configuration Selections - ADTRAN T3SU 300 User Manual

Configuration Selections for HSSI and V.35 Interfaces
The configuration selections listed in Table 3-1 are available for
HSSI and V.35 interfaces. Additional selections listed in Table 3-2
on page 50 apply only to V.35 interfaces.
Selection
I T
NTERFACE YPE
P S
ORT TATUS
P S
ORT TATE
N 75 B
X K LOCKS
P B
ORT ANDWIDTH
61202217L1-1B

Table 3-1. HSSI and V.35 Configuration Selections

Description
This read-only status field shows the interface type of the selected port
(HSSI or V.35).
This read-only status field displays one of the following messages to
show the port status of the selected port:
I :
The port is installed, but idle. Activate a port through the
NACTIVE
P S
field of this menu.
ORT TATE
A :
The port has been configured and is passing data.
CTIVE
W :
The port has been configured and is waiting for the DTE to
AITING
issue the appropriate handshaking signals. For the HSSI interface, the
terminal equipment available (TA) signal must be asserted by the DTE.
For V.35, DTR is required if the TR field in this menu is set to
O
; otherwise, DTR is ignored.
FF
E :
An error condition such as loss of transmit clock has occurred.
RROR
N I :
An interface card is not installed in the selected port.
OT NSTALLED
If a port is not installed, the remainder of the
menu does not appear.
If a port is installed but not currently in use, set to
E
to activate an installed port.
NABLED
This field determines the amount of bandwidth allocated to the selected
port. For an HSSI interface, the selections are from 1-588 (yielding a
bandwidth of 75.2 kbps to 44.2 Mbps). For a V.35 interface, the
selections are from 1-140 (yielding a bandwidth of 75.2 kbps to
10.5 Mbps). Changes to this field do not take effect until
S
is selected.
ETTINGS
This read-only status field shows the amount of bandwidth that will be
available if the selection made in the
T3SU 300 User Manual
Chapter 3. Configuration
I
DLE
P C
ORT ONFIGURATION
D
ISABLED
A
PPLY
N 75 B
field is applied.
X K LOCKS
W
HEN
. Set to
49