Voice Application; Figure 7-5. Voice Application; Table 7-5. Configuration Example For A Voice Application - ADTRAN T3SU 300 User Manual

VOICE APPLICATION

This voice application is similar to the point-to-point multiport
application (described on page 110). This application (shown in
Figure 7-5) uses two of the four DSX-1 ports on the Quad DSX-1
card to transport PBX data, including voice channels, through the
same T3 as the data. See Figure 7-5 for an example configuration of
this application.
Video
Conferencing
PBX
V.35
1.5 Mbps
Quad
DSX-1
Router HSSI
18 Mbps

Table 7-5. Configuration Example for a Voice Application

DS3 Network
DTE 1 (HSSI)
DTE 2 (HSSI)
61202217L1-1B
Main
Frame
V.35
6 Mbps
Dedicated
T3
Fiber
Network
T3SU 300
Local T3SU 300
DS3 Framing - C-bit Parity
Line Length - Short
DS3 Timing - Local
Data Link - Enabled
Port State - Enabled
Nx75k blocks - 240
Port State - Enabled
Nx75k blocks - 80
T3SU 300 User Manual
Chapter 7. Applications
Video
Main
Conferencing
Frame
V.35
6 Mbps
V.35
1.5 Mbps
T3
T3SU 300
HSSI
18 Mbps

Figure 7-5. Voice Application

Remote T3SU 300
DS3 Framing - C-bit Parity
Line Length - Short
DS3 Timing - Loop
Data Link - Enabled
Port State - Enabled
Nx75k blocks - 240
Port State - Enabled
Nx75k blocks - 80
PBX
Quad
DSX-1
Router
115