Setting Up A Pull Printing Server - NEC SuperScript 4200 Network Manual

Setting Up a Pull Printing Server

Server System Requirements
The Pull Printing server must be installed prior to server
installation.
• A Windows 95/98 or Windows NT operating system.
• Microsoft Word, Excel, and PowerPoint.
• The web server included on the SuperScript CD that
came with your printer that is automatically installed
when pull printing server is selected under the
Administrator installation.
• Internet Explorer 5.0 (this is available on the SuperScript
CD that came with your printer).
Server System Recommendation
For best performance it is recommended that your server
have a minimum of 64MB RAM.
Then, to use Pull Printing, you must
1. Set the IP Address on the printer. For instructions, see
Chapter 3.
2. Install the PrintAgent core software, Pull Printing Server
and/or Secondary File Server software.
3. Configure URLs.
This section also provides instructions for
• Setting Local User's Web Browser Preferences (optional).
• Pull Printing from Your Desktop
PrintAgent Core and Server Installation
You must install the NEC PrintAgent Core software, and the
Pull Printing server software. You can also install the
Secondary File server software. All three can be installed at
once using the Administrator Setup option. The SuperScript
4400 color laser printer is used for an example. Follow these
steps.
1. Insert the SuperScript CD that came with your printer
into the CD-ROM drive. The Installer will launch
automatically.
2. Select Program Folder
When the Select Program Folder dialog box is displayed,
type a new folder name, or select one from the Existing
Folder list and Click Next.
3. After you choose a location, the Setup Type dialog box is
displayed, select the Network Server/Administrator
setup option and click Next.
4. Select components w hen the Components list is
displayed, select PrintAgent and click the Change
button.
Pull Printing 51