Using The Remote Control - Mitsubishi Electric DLP HC910 User Manual

Using the remote control

Operational range of the remote control
Front of projector
30˚ 30˚
Operate the remote
control within a distance
of 10 m from the projector,
pointing the light beam at
the remote control photo-
sensor (front or rear) of
the projector.
Reception angle
Vertical directions
Vertical directions (ceiling mount)
Rear of projector
30˚ 30˚
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m. The operable range of the remote
control, however, depends on the characteristics of the
screen.
20°
10°
20˚
• Keep the remote control photo-sensor out of direct
sunlight or fl uorescent lamp light.
• Keep the remote control photo-sensor at least 2 m
away from fl uorescent lamps. Otherwise, the re-
mote control may malfunction.
• If there is an inverter-operated fl uorescent lamp
near the remote control, the remote control opera-
tion may become unstable.
20°
10°
20˚
EN-9