Miele KM 390 G Operating Instructions Manual page 23

Cleaning and care
Re-assemble the small, medium and
large burners as follows:
^ Place the burner head p on to the
burner base q so that the the ignitor
r and the ignition safety device s
extend through their respective holes
in the burner head. The burner head
must click into place correctly.
^ Replace the burner cap n ensuring
that the locating tabs fit into the
notches in the burner head p.
Important: replace parts in the correct
order after cleaning.
1. Do not replace the parts upside
down.
2. The locating tabs must fit exactly into
the notches.
23