Cleaning And Care; General Notes; E-Cloth; Pan Supports, Controls - Miele KM 390 G Operating Instructions Manual

Cleaning and care

General notes

Clean the appliance regularly,
preferably after each use. Allow the
appliance to cool down to a safe
temperature before cleaning.
Do not use a steam cleaner to clean
this appliance. The steam could
reach electrical components and
cause a short circuit. Pressurised
steam could also cause permanent
damage to the surface and to other
components, for which the
manufacturer cannot accept liability.
Do not use any sharp pointed
objects which could damage the
seal between the ceramic surface
and the surrounding frame and
between the frame and the worktop.
Do not use any of the following on
your hob as they can damage the
surface material:
cleaning agents containing sand,
soda, alkalines, acids or chlorides,
grill and oven sprays, dishwasher
cleaner, stain or rust removers,
scouring agents or cream cleaners,
abrasive sponges and brushes.
Do not let the ignitor in the burner
get wet. If it gets wet it will not spark.
After cleaning, dry the surfaces
thoroughly with a soft cloth to
prevent a build-up of limescale
deposits.
20

E-Cloth

A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals.

Pan supports, controls

Remove the pan supports.
The pan supports and the controls can
be cleaned with a solution of warm
water and a little washing up liquid
applied with a soft sponge. Soak
stubborn soiling first to loosen it.
Finally, wipe dry using a soft cloth.
On stainless steel models:
Replace the pan supports carefully
to avoid scratching the surface.