Operation - Miele KM 2034 Operating And Installation Manual

The control is used to ignite the burner and to regulate the
strength of the flame.
The burners can only be switched on by pressing in the
appropriate control and turning it anti-clockwise, and
switched off by turning the control clockwise. The outer
flame ring on the wok burner can only be switched on and
off by pressing the control in and turning it the appropriate
way.
The following will cause damage to the appliance:
- Switching the burner on without pressing the control
down,
- Switching the burner on by turning the control
clockwise,
- Switching the outer flame ring on or off without
pressing the control down,
- Switching the burner off by turning the control anti-
clockwise.
The manufacturer will not accept liability for any damaging
resulting from incorrect operation.
Small, medium and large burners
ß The gas supply is turned off
& Strongest flame
/ Weakest flame
Wok burner
ß The gas supply is turned off
& Stongest flame:
Both the inner and the outer burners operate at full output.
& Strong flame:
The outer burner operates at low output,
the inner burner operates at full output.
/ Weak flame
The outer burner is switched off,
the inner burner operates at full output.
/ Weakest flame
The outer burner is switched off,
the inner burner operates on low output.

Operation

19