Miele KM 2034 Operating And Installation Manual page 26

Cleaning and care
Stainless steel
surfaces
Pan supports
Controls
Burner caps
Burner heads
PerfectClean
Ignitors
Ignition safety
devices
26
Cleaning
Clean stainless steel surfaces using an E-Cloth
(see "Optional accessories") or with a solution of
warm water and a little washing-up liquid
applied with a soft sponge.
If necessary, you could use Miele ceramic and
stainless steel hob cleaner (see "Optional
accessories") and the scouring pad on the
reverse of a washing-up sponge. Apply with an
even pressure following the direction of the
"grain".
Miele conditioning agent for stainless steel can
be used after cleaning to help prevent re-soiling
(see "Optional accessories"). Follow the
manufacturer's instructions on the packaging.
Remove the pan supports. Clean the pan
supports using an E-Cloth (see "Optional
accessories") or with a solution of warm water
and a little washing-up liquid applied with a soft
sponge.
If necessary, you could use the scouring pad on
the reverse of a washing-up sponge.
Clean the controls with a solution of warm water
and a little washing-up liquid applied with a soft
sponge.
Clean the burner caps using an E-Cloth (see
"Optional accessories") or with a solution of
warm water and a little washing-up liquid
applied with a soft sponge.
If necessary, you could use the scouring pad on
the reverse of a washing-up sponge.
Clean the burner heads using an E-Cloth (see
"Optional accessories") or with a solution of
warm water and a little washing-up liquid
applied with a soft sponge.
If necessary, you could use the scouring pad on
the reverse of a washing-up sponge.
The ignitors and ignition safety devices should
be very carefully wiped clean using a well
wrung out cloth.
Intructions
Printed surfaces
(Flame symbols)
Remove any soiling which
comes into contact with the
printed flame symbols straight
away. Soiling, particularly
salty food or liquid and olive
oil, can cause damage if left
on the printed surfaces for a
long time.
Do not use stainless steel
cleaning agents on the
printed flame symbols. This
would rub off the print.
Stubborn soiling should be
soaked first.
The pan supports are not
dishwasher proof.
The controls are not
dishwasher proof.
The burner caps are not
dishwasher proof.
The burner heads have a
special PerfectClean surface
with excellent anti-stick
properties which makes them
easy to clean.
The burner heads are not
dishwasher proof.
Make sure that the flame slits
are completely dry after
cleaning.
Do not let the ignitors get
wet. If they get wet they will
not spark.