Aligning The Appliance Doors - Miele KWTN 14826 SDE ed Operating And Installation Manual

Aligning the appliance doors

The appliance doors can be aligned
with the housing after they have been
fitted.
In the following illustration the door
is shown open to make it easier to
see what you have to do.
Align the lower door using the long
outer slots in the lower hinge plate:
^ Remove centre screw
hinge plate.
^ Slightly loosen both outer screws
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws
does not need to be refitted.
72
from the
.
again. Screw
Align the upper door using the long
outer slots in the middle hinge plate:
^ Slightly loosen both screws
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws
.
.