Miele KWTN 14826 SDE ed Operating And Installation Manual page 62

Changing the door hinging
Removing the soft-close mechanism
for the upper door:
^ Open the upper door.
^ Prise open
from the soft-close
mechanism by inserting a flat-bladed
screwdriver into the gap from above
and easing it off bit by bit.
Take care not to damage the door
seal.
If the door seal becomes damaged,
the door will no longer close
properly and cooling will be
impaired.
62
^ Slide panel
and leave it hanging between the
door and the appliance.
^ Fit restraining clip
the appliance) onto soft-close
mechanism .
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Carefully prise open
and below using a flat-bladed
screwdriver.
^ Push hinge pin
underneath using a flat-bladed
screwdriver.
^ Remove cover
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel
towards the appliance,
(supplied with
from above
up and out from
.
.