Settings Mode - Miele KWTN 14826 SDE ed Operating And Installation Manual

Switching on and off
^ Touch the On/Off sensor until the
"Wine conditioning" symbol goes out.
The interior light will not come on when
you open the door and the wine
conditioning zones are switched off.
The freezer section remains switched
on and the "Freezing" symbol is lit up.
To switch the wine conditioning
zones back on again
^ Select one of the wine conditioning
zones so that the corresponding
Wine conditioning symbol lights up
yellow, and touch the On/Off sensor
until the temperature display lights
up, or
^ Switch the appliance off and then
back on again.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
16

Settings mode

Certain settings on the appliance can
only be selected in the settings mode.
How to select the settings mode and
how to change the settings is
described in the relevant section of
these instructions.
Overview of functions that can be
selected in the settings mode:
To enter or leave the settings
mode
To switch the sensor tones
on/off
(see "Switching on and off")
To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")
To switch the safety lock on/off
(see "Switching on and off")
To change the brightness of
the temperature display
(see "The correct
temperature")
To set the water intake time for
the ice cube maker
(see "Making ice cubes")
The door alarm is disabled when the
appliance is in the settings mode.
As soon as the door is closed, the
door alarm is activated again.
c
b
^
u
d
e