Table of Contents
Advertisement
Cleaning and care
^ Wait until the ice cube tray has
completed this rotation before
continuing.
^ Then take the ice cube drawer out of
the appliance and clean it.
^ Now clean the ice cube tray with hot
water and a little washing-up liquid or
sterilising fluid. Rinse thoroughly
afterwards.
^ Press the On/Off button on the ice
cube maker.
^ Then put the ice cube drawer back in
the appliance and close it.
The ice cube tray will return to its
original position.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
If the ice cube maker has not been
used for a while, it is important to
clean the ice cube tray before using
it again.
If you have used a solution of water
and washing-up liquid to clean it,
discard the ice cubes from the first
three ice cube making processes,
as they are not suitable for
consumption.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
40
Door seals
Do not use any grease or oil on the
door seals as these will cause them
to deteriorate and become porous
over time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
Hide quick links:
Advertisement
Table of Contents
