Table of Contents
Advertisement
^ Slide soft-close mechanism bracket
as far as it will go towards the
handle side of the door, and undo
screws
on the soft-close
mechanism.
^ Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
^ Then place it to one side.
Changing the door hinging
Removing the upper door:
^ Gently loosen cover
inserting a flat-bladed screwdriver
into the gap.
^ Remove cover
retainer
.
^ Then separate retainer
, by pushing it slightly to the left
and then pulling the cover forwards
and off.
^ Rotate
by 180°.
^ Then fit cover
retainer
, and push it over to the
right. The writing must be visible.
^ Unscrew hinge part
180° and fit to the opposite side. If
necessary drill pilot holes for the
screws.
^ Remove cover
forwards from the back and then
lifting it off.
^ Remove cover
upwards.
by carefully
together with
from cover
from the front over
, turn through
by sliding it
by pulling it
63
Hide quick links:
Advertisement
Table of Contents
