Miele Paragon sensor Operating Instructions Manual page 30

Honeycomb care for condenser tumble dryer
Table of Contents

Advertisement

Problem solving guide
Problem
There is a build
up of fluff.
The laundry is
not sufficiently
dry.
The interior
drum lighting
does not come
on.
30
Possible cause
Fluff is principally the result of
friction when garments are
being worn and washed.
Machine drying hardly
causes any fluff to form and
has been established by
research institutes to have no
appreciable effect on the
lifetime of the garment.
The load consisted of
different fabrics.
The lighting switches off
automatically (to save
energy).
The lamp needs changing.
Remedy
Fluff is collected by the fluff
filters and can be easily
removed (see "Cleaning and
care").
– Finish drying using "Warm
air" (timed drying).
– Select a more suitable
drying programme next
time (see "Programme
chart").
Switch the dryer off and then
on again.
Change the lamp as
described at the end of this
section.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Honeycomb care paragon sensor

Table of Contents