Miele PT 5137 WP Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. PT 5137 WP
  6. Operating and installation instructions

Miele PT 5137 WP Operating And Installation Instructions

Heat pump tumble dryer
Hide thumbs Also See for PT 5137 WP:
Table of Contents

Advertisement

Quick Links

Operating and installation instructions
for heat pump tumble dryer
PT 5137 WP
en - GB
To avoid the risk of accidents or
damage to the machine, it is
essential to read these instructions
before it is installed, commissioned
and used for the first time.
M.-Nr. 09 754 890

Advertisement

Table of Contents
loading

Related Manuals for Miele PT 5137 WP

Summary of Contents for Miele PT 5137 WP

  • Page 1 Operating and installation instructions for heat pump tumble dryer PT 5137 WP en - GB To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed, commissioned and used for the first time.

  • Page 2: Caring For The Environment

    Caring for the environment Disposal of the packing Energy saving tips material To avoid unnecessarily long drying times and high consumption of energy: The transport and protective packing has been selected from materials which – Make sure that your laundry is are environmentally friendly for disposal thoroughly spun before drying.

  • Page 3: Table Of Contents

    Contents Caring for the environment ......... . 2 Warning and Safety instructions .
  • Page 4 Contents Cleaning the surfaces of the fluff filters ....... . . 34 Cleaning them whilst dry .
  • Page 5 Contents Installation site ........... . 52 Transporting the dryer to its installation site .

  • Page 6: Warning And Safety Instructions

    If using dry cleaning kits, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
  • Page 7 Do not install or use a damaged tumble dryer. Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Do not connect the tumble dryer to the mains electricity supply by an extension lead. Extension leads do not guarantee the required...
  • Page 8 Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the guarantee. Ensure current is not supplied to the tumble dryer until after maintenance or repair work has been carried out.
  • Page 9 Warning and Safety instructions Heat pump technology and refrigerant: – The tumble dryer uses a gaseous refrigerant which is neither flammable nor explosive. – The noises caused by the heat pump during the drying process are normal and do not impair the efficient functioning of the dryer. –...
  • Page 10 Warning and Safety instructions Please observe the instructions in "Installation and connection" and "Technical data". The socket must be easily accessible after installation in order to disconnect the tumble dryer from the electricity supply. For hard-wired machines, the all-pole isolator provided on-site must be easily accessible after installation in order to disconnect the tumble dryer from the electricity supply.
  • Page 11 Warning and Safety instructions Correct use The maximum load of dry laundry for this tumble dryer is 6.5 kg. See the Programme chart for the maximum recommended loads in individual programmes. Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up.
  • Page 12 Warning and Safety instructions To avoid operational faults: – After every cycle remove fluff from the surfaces of the fluff filters. – The fluff filters and the plinth filter must be dried after being cleaned with water. Wet fluff filters or a wet plinth filter could cause operational faults. –...
  • Page 13 Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc).
  • Page 14 Warning and Safety instructions Danger. This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device). If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust. To prevent the risk of fire, the following must not be tumble dried: –...
  • Page 15 Warning and Safety instructions Benzine, petrol, paraffin or any easily flammable liquid must not be stored or used near the tumble dryer. Danger of fire and explosion. Do not allow air contaminated with chlorine, fluorine or other vapours containing solvents to get into the tumble dryer. Fire hazard.
  • Page 16 If non-Miele parts are used, guarantee, performance and product liability claims may be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele tumble dryer and Miele washing machine.

  • Page 17: Operating The Tumble Dryer

    For selecting delay start; time of day independently of the electricity display supply. e PC/Optical interface Note regarding the This is used by Miele service commissioning of the tumble technicians during servicing work for testing purposes. dryer Before using the dryer for the first time, ensure that it is correctly installed and connected.

  • Page 18: Display

    Operating the tumble dryer Display The following are shown in the display: – programme selection – programme duration and the programme start and end time The following are selected via the display: – Special programmes Automatic (if activated) Denim Shirts –...

  • Page 19: Before Using For The First Time

    Entry menu appears. Entry menu When the tumble dryer is switched on for the first time, the Miele Professional The Entry menu will always appear after welcome screen will appear. the dryer has been switched on, until you select a programme.

  • Page 20: Notes And Tips On Laundry Care

    Notes and tips on laundry care 1. Sort the laundry – New dark-coloured garments should be washed and dried separately Garment care label symbols from light-coloured garments the first few times they are washed, to avoid Drying the risk of colours running and q/r Normal/low temperature discolouring other garments or even the plastic components in the...

  • Page 21: Load The Tumble Dryer

    Notes and tips on laundry care 2. Load the tumble dryer 3. Select a programme – On many programmes, different Using the tumble dryer drying levels can be selected incorrectly could cause a fire. Read depending on individual the "Warning and Safety instructions" requirements: before using the dryer.

  • Page 22: Short Instructions

    Short instructions A Sort the laundry It is very important to read the "Notes and tips on laundry care" section before proceeding. B Load the tumble dryer To avoid damaging your laundry, when shutting the door check that no items of laundry have become trapped in the door opening.
  • Page 23 Short instructions C Select a programme To select a Special programme ^ Press the On/Off button s briefly to A selection of programmes will appear switch on. in the display when you select Special programmes. Please note: Denim – If no further selection is made within 15 minutes, the dryer will switch off Shirts automatically.
  • Page 24 Short instructions Gentle tumble button Changing the programme sequence ^ Select this option for items which are Further information about the following susceptible to creasing and which can be found under "Changing the are not suitable for drying with a programme sequence": great deal of mechnical action.
  • Page 25 Short instructions Before the end of a programme There is a cooling down phase at the end of the drying sequence: Cooling down will appear in the display. The programme is not finished until the cooling down phase has been completed.

  • Page 26: Delay Start

    Delay start To begin Delay start Depending on the Delay start setting, ^ Press the Start button. you can set the time you wish a programme to finish or start at, or you Normal can delay the start of the programme. Factory default: Delay start not activated.

  • Page 27: Programme Chart

    Programme chart Gentle tumble This option can be selected with the following programmes: Cottons, Minimum iron, Warm air, Denim, Shirts Notes – For drying items which are not suitable for drying with a great deal of mechanical action. When this option is selected, the drum will rotate less frequently.
  • Page 28 Programme chart Towelling Max. load 6.5 kg Normal+ Use for – Large quantities of single-layer and multi-layer towelling items. – Towels, dressing gowns, face flannels, towelling bedding Smoothing Max. load 3 kg Use for – Cotton and linen fabric – Minimum iron mixed fibre, cotton or synthetic fabric, e.g. trousers, anoraks, shirts Notes –...

  • Page 29: Special Programmes

    Programme chart Special programmes Denim Max. load 3.5 kg Normal, Hand iron r Use for – Denim garments, e.g. jeans, jackets, skirts, shirts Shirts Max. load 2.5 kg Normal, Hand iron r Use for – Shirts and blouses Outerwear Max. load 3.5 kg Normal, Hand iron r Use for –...
  • Page 30 – The drum does not rotate in this programme. For this reason, airing and drying may only be carried out if the Miele drying basket (optional accessory) is fitted in the drum. – Use this programme to dry items which are suitable for drying in a tumble dryer but which are not suitable for drying using mechanical action.

  • Page 31: Changing The Programme Sequence

    (depending on how the machine ^ Add or remove items as required. was set up*). ^ Close the door. * A Miele service technician can re-set ^ Press the Start button. the payment system so that programming changes can be made Power cut within a specified time period.

  • Page 32: Cleaning And Care

    Cleaning and care 1. When to clean the surfaces of the This tumble dryer has a multi-stage fluff filters filter system consisting of the fluff filter in the door, the fluff filters in Clean the surfaces of the fluff filters the door opening (1.) and a plinth after each drying programme.

  • Page 33: When To Clean The Plinth Filter

    Cleaning and care 2. When to clean the plinth filter 3. When to clean the grille in the bottom right/airway Normal operation of the dryer The grille should only be cleaned The plinth filter should be cleaned when Open bottom right grille. Clean when the Clean plinth filter prompt airways appears in the display.

  • Page 34: Cleaning The Surfaces Of The Fluff Filters

    Cleaning and care ^ Use your fingers or a vacuum cleaner Cleaning the surfaces of the to remove the fluff from the surface of fluff filters the filter. When to clean ^ Remove any fluff from the hollow part of the door with a bottle brush or a Clean the surfaces of the fluff filters vacuum cleaner.

  • Page 35: Cleaning Them With Water

    Cleaning and care Cleaning them with water Replacing the filters If there is a great deal of compacted Do not replace the filters if they fluff on any of the filters, they can be are damp or wet. Damp or wet filters removed and cleaned under hot could cause operational faults.

  • Page 36: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter When to clean Normal operation of the dryer The plinth filter should be cleaned when the Clean plinth filter prompt appears in the display. ^ Press OK to delete the Clean plinth filter prompt. Confirm with OK. Continuous operation of the dryer ^ Pull the filter out by the handle.

  • Page 37: Cleaning

    Cleaning and care Cleaning Danger of injury. Tip: You can also use a vacuum Do not touch the cooling fins. You cleaner to remove the fluff. This makes could cut yourself. it easier to clean the filter with water. ^ Clean the filter thoroughly under Prevent damage.

  • Page 38: Replacing

    Cleaning and care Replacing A programme cannot be started if the filter is not replaced in the dryer or is replaced the wrong way round. A message will appear in the display. ^ Close the access flap. The filter must be fitted correctly and the access flap closed to ensure that water cannot leak from the condenser system and to ensure...

  • Page 39: Bottom Right Grille/Airway

    Cleaning and care Bottom right grille/airway Cleaning ^ Check whether the cooling fins are When to clean clogged. The grille should only be Danger of injury. cleaned when Open bottom right Do not touch the cooling fins with grille. Clean airways appears in the your hand.

  • Page 40: Replacing

    ^ After cleaning, dry with a soft cloth. A range of Miele branded cleaning and conditioning agents is available to order via the Miele Spare Parts Department or via the internet at www.miele-shop.com.

  • Page 41: Problem Solving Guide

    Problem solving guide With the help of the following guide, minor faults in the performance of this dryer, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations.
  • Page 42 Problem solving guide Problem Possible cause Remedy – The filter is clogged. – Clean the filters as Clean plinth filter described in "Cleaning – The fluff filters in the and care". . . door and door . . . "Cleaning the plinth opening may also be filter"...

  • Page 43: An Unsatisfactory Drying Result

    Problem solving guide An unsatisfactory drying result Problem Possible cause Remedy The laundry is not The load consisted of – Finish drying using the sufficiently dry. different fabrics. Warm air programme. – Select a different programme next time (see "Programme chart").

  • Page 44: Other Problems

    Problem solving guide Other problems Problem Possible cause Remedy The drying Please check all the possible causes and switch the dryer off and then back on again. process goes on too long or Ventilation to and from the Open a door or window while even switches dryer may be insufficient, e.g.
  • Page 45 Problem solving guide Problem Possible cause Remedy There are humming The compressor is These noises are quite noises. operating. normal and do not indicate a fault. The interior drum The lighting switches off It will switch on again after lighting does not automatically (to save the door has been closed come on.
  • Page 46 The programme selector The programme selector light goes out when the light comes on when a Settings menu has been programme is selected. selected. If the problem persists, Contact the Miele Service there is a fault. Department.

  • Page 47: Changing The Lamp

    ^ Apply a little pressure and whilst doing so turn your wrist in the direction of the arrow to open the cover. The cover will open downwards. The temperature resistant lamp should only be ordered from your Miele dealer or the Miele Spare Parts Department.

  • Page 48: After Sales Service

    – the Miele Service Department (see back cover for contact details). Optional accessories for this dryer are available from your Miele Dealer or from When contacting the your Dealer or the the Miele Spare Parts Department. Service Department, please quote the...

  • Page 49: Installation And Connection

    Installation and connection Front view a Mains connection cable f Non-return valve, recommended. b Control panel g Non-return valve, necessary. c Door h Condensed water drain hose d Plinth filter access panel. i Bottom right grille = Air cooling vent Only open the panel if a message Only open the grille if a message appears in the display.

  • Page 50: Rear View

    Installation and connection Rear view a Protruding lid edge for holding when moving the machine b Mains connection cable c Condensed water drain hose d Air cooling vent...

  • Page 51: View From The Side

    View from the side View from above Washer-dryer stack Stainless steel plinth Stainless steel plinth* (open or closed). A stacking kit is required. The stacking kit must be fitted by a Miele authorised service technician. * Miele accessory available to order...

  • Page 52: Installation Site

    Installation and connection Installation site If transporting the dryer at an Make sure the dryer door can be angle, only tip it towards its left side. opened without hindrance after installation. Transporting the dryer to its installation site When moving the dryer, hold it by the lid where it protrudes to the rear.

  • Page 53: Levelling The Tumble Dryer

    Installation and connection Levelling the tumble dryer Never block the vents on the dryer. In order to ensure sufficient ventilation to the dryer, do not reduce the vent gap between the underside of the dryer and the floor with a plinth, deep-pile carpet, etc. This tumble dryer is not suitable for building under.

  • Page 54: Payment System

    Installation and connection Payment system Room ventilation The dryer can be fitted with a Miele – Cool air is taken in and then warmed payment system (optional accessory). during the drying process after which This must be connected and it is expelled from the dryer.

  • Page 55: Hose For External Drainage Of Condensed Water

    Installation and connection Hose for external drainage of Drain hose connection condensed water Direct into a sink or basin – Secure the hose carefully (e.g. by The condensed water is pumped tying it to a tap to make sure it away through the drain hose at the cannot slip during use).

  • Page 56: Example: Connection To A Sink Drain Outlet

    Installation and connection ^ Use a screwdriver to tighten hose Example: Connection to a sink drain clip 3 up close to the nut. outlet Non-return valve 5 has to be fitted with the arrow pointing in the direction of flow (i.e. towards the sink).

  • Page 57: Electrical Connection

    30 mA residual current device (RCD). An electrical safety test must be carried out after installation and after any ser- vice work. The mains connection cable may only be replaced by an original Miele spare part.

  • Page 58: Technical Data

    Technical data Height 850 mm Width 595 mm Depth 727 mm Depth with door open 1202 mm Weight 79.5 kg Drum volume 130 litres Maximum capacity 6.5 kg dry weight Drain hose length 1400 mm Length of connection cable 2000 mm Voltage Connected load Fuse rating...

  • Page 59: Changing Default Settings

    – Code not required Some of the settings may be changed. – Code required All of the settings may be changed. Please contact Miele for details. Note: The tumble dryer must be commissioned as described at the beginning of this booklet.

  • Page 60: Settings Menu

    Settings menu Opening the Settings menu Closing the Settings menu Back A If the Settings menu is not locked, some of the settings may be Language F changed. Supervisor level A The entry menu showing the current ^ Select Back and confirm your time of day will appear after the dryer selection with the OK button.

  • Page 61: Language J

    Settings menu Language J You can select the language displayed via the Languages J sub-menu. Enter code The flag after the word Language acts ^ Use the + button to enter the first as a guide to prevent a language which number.

  • Page 62: Anti-Crease

    Settings menu Anti-crease Time of day At the end of the programme the First select whether you want the drum can be set to rotate at intervals clock displayed as a 24 hour or 12 for one or two hours to prevent hour clock, or to not display it at all.

  • Page 63: Standby

    Settings menu Standby Drying levels The bars show you the setting. To save energy, the display goes out after 10 minutes and the indicator Cottons light for the Start button flashes slowly. Minimum iron The display is switched on again by You can alter the drying levels for the moving the programme selector or Cottons and Minimum iron...

  • Page 64: Clean Out Airways

    Settings menu Clean out airways Delay start The electronic unit in the dryer You can set a later start time using detects the degree of a blockage Delay start (see "Delay start"). caused by fluff or detergent residues You can decide how this time is in the filter, and the following prompt displayed.
  • Page 68 Alteration rights reserved/3813 M.-Nr. 09 754 890 / 01...

Table of Contents