Miele Paragon sensor Operating Instructions Manual page 14

Honeycomb care for condenser tumble dryer
Table of Contents

Advertisement

How to dry correctly
E Select any extra options
Selecting/deselecting
Indicator light on = Extra option is
selected
(see "Extra options" for more details)
^ Each press of the top button selects
the Extra option - indicator light on
(and deselects the previous option)
or no option is selected.
On some programmes Low
temperature is a standard part of the
programme and so cannot be
deselected.
^ Pressing the lower button selects or
deselects Anti-crease.
Cool air:
^ First select the 20 min warm air
programme and then press the top
extra option button until the Cool air
indicator light comes on.
14
Select the buzzer if wished
A buzzer sounds (at intervals for a
maximum of 1 hr) to let you know the
programme has finished.
The buzzer can be switched on or off
even after a programme has started.
The buzzer will still sound if there is a
fault, even if it has been switched off.
You can alter the pitch of the buzzer:
^ Select a programme.
^ Press the Buzzer button (the Buzzer
indicator light will light up), until the
desired pitch is reached. Then
release the button.
F Select Delay start if wished
^ The start of a programme can be
delayed by up to 24 hours (24^). See
"Delay start " for more details.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Honeycomb care paragon sensor

Table of Contents