Miele H 115 MB Operating Instructions Manual page 76

Electrical connection of the
appliance should be undertaken by
a qualified electrician in strict ac-
cordance with national and local
safety regulations.
Caution:
In order to avoid a hazard this ap-
pliance must be installed according
to these instructions for installations.
The appliance is suitable for connec-
tion to
– AUS:
an a.c. single phase 240 V, 50 Hz
electricity supply.
– NZ:
an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A (max. rated load
3000 W).
Fusing arrangements must be accord-
ing to national and local standards.
Connection should be made via a suit-
able isolator switch which complies
with national and local regulations. It
should be easily accessible for servic-
ing work.
The situated at the front of
the oven interior gives the necessary
connection rating.
76
In certain unfavourable circumstances
microwave appliances can be a source
of interference. In this event please con-
tact your dealer or the Miele Service
Dept.
WARNING
THIS APPLIANCE MUST BE
EARTHED