Miele H 115 MB Operating Instructions Manual page 35

Frequently when using the microwave
different power settings may be re-
quired by the one process, e.g. defrost-
ing followed by reheating or cooking
food.
These different power settings can be
stored together with the relevant times
required and called up all at once
using the Memory touch control. Food
should be left to stand for a few
minutes at room temperature when it
has been cooked in the microwave.
This is to ensure that the temperature is
evenly distributed throughout the food.
This standing time can also be stored
using the Memory function (Microwave
power setting: 0 W).
Up to 5 stages can be stored in se-
quence.
Use the Memory as follows:
Enter the stages of the programme
in the sequence you wish them to
run.
Use the function selector switch to
chose the microwave mode.
Enter the microwave power setting.
Press Enter to confirm.
Enter the time.
In total a microwave power setting
of 1200 W for a maximum of
10 minutes and a microwave power
setting of 850 W for a maximum of
60 minutes can be entered.
Press the Memory touch control to
store the entries in the memory.
Enter each programme in this way. The
number after the "M" in the display
area will indicate which memory pro-
gramme is being stored.
Begin the programme by pressing
the Start touch control.
The time left to run for the process will
count down in the data entry display.
The time and the microwave power set-
ting for the process currently counting
down will appear in the display area for
the settings selected.
After the process is finished, the num-
ber in the display area will disappear
and the next process will begin.
Press the Stop/C touch control.
All the entries which had been made
are now cancelled and need to be en-
tered again.
35