Adaptec 4000SAS Installation And User Manual page 48

Review the information that is displayed.
7
Note: Adaptec Storage Manager uses the term logical drives when
referring to arrays (see
In the example below, Adaptec Storage Manager has used four
equal-sized disk drives to automatically create one logical drive with
RAID 5 and a hot spare.
To specify a size for the logical drives, or to make other changes to
the configuration, click Modify logical devices.
Click Apply, then click Yes when prompted to confirm applying your
8
new configuration.
Adaptec Storage Manager builds the logical drive(s).
The configuration is saved on the Adaptec controller (as an "array",
see page 13) and on the physical disk drives.
Partition and format your logical drive.
9
The logical drive you created appears as a physical disk drive on your
operating system. You must partition and format these logical drives
before you can use them to store data.
Close all windows, then click Reboot to restart your system.
10
Remove the RAID Installation CD.
11
For information on installing and using Adaptec Storage Manager as
a full software application, refer to the Adaptec Storage Manager
User's Guide or online Help.
Continue with
12
Chapter 6: Creating a Bootable Array
page 13).
Making Your Array Bootable on page
48
49.