About The Adaptec Raid 51245 - Adaptec 5085 Installation And User Manual

About the Adaptec RAID 51245

The Adaptec RAID 51245 is a SAS RAID controller with these features:
I2C, CN2
Activity
CN0, CN1
CN6
1 external
mini-SAS
connector
Form Factor
Bus compatibility
PCIe bus width
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
Connectors, Internal
Connectors, External
Maximum number of disk drives
MaxIQ SSD support
Enclosure Support
Onboard speaker
Battery Backup Module
Chapter 3: About Your RAID Controller
Mode 0 Flash
Activity CN2
ABM-800 connector
Full Height, Half Length
PCIe 1.1
x8
3 Gb/s per port
16
512 MB DDR2
3 mini-SAS x4 (SFF-8087)
1 mini-SAS x4 (SFF-8088)
16 direct-attached (or up to 256 with expanders)
8 Adaptec MaxIQ-branded/Intel X25-E SSDs (2TB max)
I2C and SGPIO
Yes
Adaptec Battery Module 800/800T (sold separately—see
page 19)
24
●
I2C, CN1
I2C, CN0
CN0
3 internal
CN1
mini-SAS
connectors
CN2
Reserved
Ext. Alarm
Aggregate Activity