Chapter 3 How To Load Paper; How To Load Paper; Precautions For Loading Paper; Loading Paper Into The Drawer - Triumph Adler DC 2025 Instruction Handbook Manual

CHAPTER 3

1. How to load paper

Paper can be loaded into the two drawers and the multi-bypass.

(1) Precautions for loading paper

After unpacking the paper, fan it several times and then load into
the tray.
IMPORTANT
• Loading paper into the standard drawer, optional paper feeder
or multi-bypass when some paper is still remaining in each of
them may cause paper misfeeds.

(2) Loading paper into the drawer

Up to 500 sheets of standard paper (75 or 80 g/m
per as specified by our company) or colored paper can be loaded
into the each drawer.
(Inch specifications)
• The each drawer can be set to hold paper of any desired size
from 11" ✕ 17" to 5 1/2" ✕ 8 1/2".
(Metric specifications)
• The each drawer can be set to hold paper of any desired size
from A3 to A5R and Folio.
IMPORTANT
• Set the type of paper (standard paper, recycled paper, letter-
heads or colored paper) to be loaded in the drawer in "Paper
type (1st to 2nd cassette)" on page 6-16.
HOW TO LOAD PAPER
2
/standard pa-
1
Pull the drawer out toward you as far as it will go.
* Do not pull more than one drawer out at a time.
Hold the width adjustment lever and move it to align the
2
width guide with the required paper width.
Paper sizes are marked inside the drawer.
3 Hold the length adjustment plate and move it to align
with the required paper length.
3-1