Preparations; How To Load Paper; Loading Paper Into Drawers - Triumph Adler DC 2023 Instruction Handbook Manual

PREPARATIONS

11

(1) How to load paper

Paper can be set in three positions in total; two drawers in which paper can be
loaded from the front of the copier, and the multi-bypass.
It is also possible to install the optional paper feed unit (drawer-type or large-
capacity deck-type).

1 Loading paper into drawers

Paper can be loaded into the drawers from the front of the copier. Each drawer
holds up to 550 sheets of standard paper (80g/m
company).
The drawer can be set to hold paper of any desired size from A3 to A5 (vertical),
and Folio.
1. Pull the drawer out toward you as far as it will go.
* Do not pull more than one drawer out at a time.
2. Hold the width adjustment lever and move it to align the width guide with the
paper's width.
3. Move the length adjustment plate inclining to the left to align the length guide
with the paper's length.
4. Fit the length adjustment plate in the slits on the bottom of the drawer that
matches the size of paper to be set.
2 /standard paper specified by our