Hdmi1 Audio; Lip Sync Latency; Digital Output - Toshiba 32AV563 Owner's Manual

HDMI1 Audio

If the connected HDMI source does not support digital audio,
plug the audio cable into HDMI1 (AUDIO) on the back of the
television (as shown in the 'Connecting an HDMI™ or DVI device
to the HDMI input' section), then use the HDMI1 Audio setting.
a
In the AV Connection menu press
HDMI1 Audio and using
Analogue.
AV Connection
HDMI1 Audio
Lip Sync
EXT2 Input

Digital Output

If the sound is missing select an alternative setting.
NOTE: HDMI1 supports digital and analogue sound,
HDMI2 is digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
u
to highlight
I i
or select Auto or
Auto
Off
AV
PCM
33

Lip Sync Latency

Lip Sync can synchronize the sound and picture. This feature is
only available for HDMI equipment compatible with Lip Sync.
NOTE: Disconnect the HDMI cable before changing the Lip
Sync setting. If the HDMI cable is connected, a message will
appear.
a
Select the appropriate HDMI input from the input
selection window.
b
In the AV Connection menu press
Sync.
c
I i
Using or select On or Off.
Digital Output
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
PCM: this mode outputs PCM format to the digital audio output
socket.
Auto: this mode outputs Dolby Digital or PCM to the digital
audio output socket providing it is being broadcast.
S
Dolby Digital Dolby Digital
S
Dolby Digital Plus
S
MPEG PCM
a
In the AV Connection menu press
Output.
b
I i
Use or to select PCM or Auto.
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing,
LLC.
CONTROLS AND FEATURES
u
to highlight Lip
Dolby Digital
u
to select Digital