Hdmi1 Audio - Toshiba RV55* Digital Series Owner's Manual

AV connections (continued)
PC Audio
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
'Connecting a computer' section), then use the
PC/HDMI1 audio settings.
In the AV connection menu press
1
PC/HDMI1 audio.
select the PC option.
Use to
x
2
NOTE: Selecting the PC option will force HDMI
into digital audio.

HDMI1 Audio

If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI1 audio on the
back of the television (as shown in the 'Connecting a
computer' section), then use the HDMI1 audio settings.
In the AV connection menu press
1
PC/HDMI1 audio and using
Then highlight HDMI1 audio and using
2
select Auto., Digital or Analogue.
AV connection
PC/HDMI1 audio
HDMI1 audio
HDMI setting
EXT2 input
Woofer
Back Watch TV
MENU EXIT
If the sound is missing select an alternative setting.
NOTE: HDMI1 supports digital and analogue sound,
HDMI2 and HDMI3 are digital sound only.
Certain formats of DVD disk may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
Input selection and
to highlight
e
to highlight
e
select HDMI1.
x
or
z x
HDMI1
Auto.
AV
Internal
40
HDMI setting
Some early HDMI equipment may not work properly with
the television. If so first unplug the HDMI cable then try
setting the options in HDMI setting to Off.
In the AV connection menu press
1
HDMI setting and press OK.
AV connection
PC/HDMI1 audio
HDMI1 audio
HDMI setting
EXT2 input
Woofer
Back Watch TV
MENU EXIT
Press and to select an option, then
f e
2
to adjust the settings.
HDMI setting
Deep Color
xvYCC
Lip Sync
Back Watch TV
MENU EXIT
Deep Color: This option will subtly enhance the colour.
x.v.Colour: This option expands the colour range in the
HDMI signal.
Lip Sync: Enabling this option can syncronize the sound
and picture.
NOTE: These features will only be available with
connected HDMI equipment. If the HDMI source does not
support these features the television may not work
properly when they are enabled.
If the HDMI connection is capable of 1080p and/or the
television is capable of refresh rates greater than 60Hz or
supports Deep Color, a Category 2 cable will be required.
Conventional HDMI/DVI cable may not work properly
with this mode.
EIA/CEA-861-D compliance covers the transmission of uncompressed
digital video with high-bandwith digital content protection, which is being
standardized for reception of
high-definition video signals. Because this is an evolving technology, it is
possible that some devices may not operate properly with the TV.
HDMI, the HDMI logo, High-Definition Multimedia Interface and Deep
Color are trademarks or registered trademarks of HDMI Licensing, LLC.
to highlight
e
HDMI1
Auto.
OK
AV
Internal
or
z x
Off
Off
On