Table of Contents
Advertisement
CONTROLS AND FEATURES
Input selection and AV
connections
See page 7 for a clear view of the back connection
recommendations.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
This button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (EXT3) and the VIDEO INPUT
(EXT4).
o
An S in the display e.g.
2S (EXT 2S), indicates the input is set
for an S-Video signal.
Input selection
Use the Input Selection window if the television does not switch
over automatically.
a
At any time by pressing
showing all inputs and external equipment. Use
u
to highlight an input and
Inputs
DTV
HDMI1
HDMI2
ATV
HDMI™ displays equipment connected to Input HDMI
on the back of the television.
o
o
a list will appear on screen
U
and
Q
to select.
1
2
3
4
INPUT signal selection
This specifies the type of signal going into SCART 2 (EXT2) on
the back of the television. Please refer to the manufacturer's
instructions for the connected equipment.
a
In the SETUP menu press
highlighted, then press
SETUP
Menu Language
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Picture Position
b
I
i
With
or
select either AV or S-VIDEO as the
required input for EXT2.
AV Connection
HDMI1 Audio
Lip Sync
EXT2 Input
Digital Output
If video colour is absent, try the alternative setting.
32
u
until AV Connection is
Q
.
English
France
Digital
Off
AV
Auto
Advertisement
Table of Contents
