Setting The Hdmi1 Audio Mode - Toshiba 22EV700E Owner's Manual

The HDMI input is designed for best
performance with 1080i (0/60 Hz) and 1080p
(50/60 Hz) high-definition video signals, but will
also accept and display 6i/ p, 0p (0Hz);
80i/p, 0p (60 Hz: except for E-EDID) signals.
Please see "Acceptable Video signals through
HDMI terminals" on page .
• HDMI: High-Definition Multimedia Interface
• DVI: Digital Visual Interface
• HDCP: High-bandwidth Digital Content
Protection
• CEA-861-D compliance covers the
transmission of uncompressed digital
video with high-bandwidth digital content
protection, which is being standardized for
reception of high-definition video signals.
Because this is an evolving technology,
it is possible that some devices may not
operate properly with the TV.
• E-EDID: Enhanced-Extended Display
Identification
• Acceptable PC signal format: please see
"Acceptable PC signals through HDMI-1/D-
SUB terminals" on page .
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the
compressed image is displayed in S-XGA
mode, therefore the picture quality may
deteriorate and characters may not be read.
Connecting.an.HDMI.device
One HDMI cable (type A connector)
TV back view
HDMI device
For proper operation, it is recommended that
you use a short HDMI cable.
HDMI cable transfers both video and audio.
Connecting your TV
Connecting.a.DVI.device
One HDMI (type A connector)-to-DVI adapter
cable and an audio cable.
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed m. The
recommended length is m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
Setting.the.HDMI1.audio.mode
1
2
3
TV back view
DVI
OUT
OUT
IN
VIDEO AUDIO
L R
Press MENU then press t or u to display
the SET UP menu.
SET UP
Language
Automatic Power Down
AV connection
Horizontal position
Vertical position
Sampling clock
Clock phase
Auto Adjust
OK Enter
RETURN
Press p or q to select AV connection,
and then press to display the AV con-
nection menu.
Press t or u to select Auto, Digital or
Analogue.
AV connection
HDMI1 audio
EXT1 input
TV back view
English
Off
OK
100
100
100
0
OK
Back
Auto
AV