If the RED LED is unlit check that the mains plug is connected to the power supply. If the picture does
not appear press
on the remote control, it may take a few moments.
To put the television into Standby press
The picture may take a few seconds to appear.
To set up the television you will now need to use the on screen menus. Press
to see the menus.
The on-screen menu appears as a list of five topics. As each symbol is selected by pressing ◄ or ► on
the navigation ring on the remote control, its respective options will appear below.
To use the options, press ▲ or ▼ on the navigation ring to move through them and use
select the required choice. Follow the on-screen instructions. The functions of each menu are described
in detail throughout the manual.
To alter the volume press –
To alter the programme position press
Press
and ▲, ▼, ◄ or ► to control the sound and picture options.
Press
to finish.
To select the external input, press
appropriate input source is selected as described on page 29.
Please always refer to the owner's manual of the equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the sound from all speakers.
Switching on
on the remote control. To view the television press
Using the remote control
Using the controls
.
P
.
and then use
, ▲, or ▼ to move through the list until the
15
SETTING UP
again.
on the remote control
, ◄ or ► to