Editing Atm Layer Options; Figure 29-5 Menu 11.5 Remote Node Filter (Rfc 1483 Or Enet Encapsulation); Figure 29-6 Menu 11.5 Remote Node Filter (Pppoa Or Pppoe Encapsulation) - ZyXEL Communications Prestige 653HWI series User Manual

Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that
blocks NetBIOS packets. Include this in the call filter sets if you want to prevent NetBIOS packets from
triggering calls to a remote node.

Figure 29-5 Menu 11.5 Remote Node Filter (RFC 1483 or ENET Encapsulation)

Figure 29-6 Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation)

29.5 Editing ATM Layer Options

Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options.
In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR] to select
Yes. Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options.
There are two versions of menu 11.6 for the Prestige, depending on whether you chose VC-based/LLC-
based multiplexing and PPP encapsulation in menu 11.1.
Remote Node Configuration
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
Protocol filters=
Device filters=
Enter here to CONFIRM or ESC to CANCEL:
Prestige 653HWI Series User's Guide
29-9