Editing Atm Layer Options; Vc-Based Multiplexing (Non-Ppp Encapsulation); Figure 82 Menu 21.12 Webset 12 - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

Prestige 660RU-Tx Series User's Guide

Figure 82 Menu 21.12 WebSet 12

# A Type
- - ---- ----------------------------------------------------------- - - -
1 Y IP
2 Y IP
3 Y IP
4 Y IP
5 N
6 N

18.5 Editing ATM Layer Options

Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options.
In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR]
to select Yes. Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options.
There are two versions of menu 11.6 for the Prestige, depending on whether you chose VC-
based/LLC-based multiplexing and PPP encapsulation in menu 11.1.

18.5.1 VC-based Multiplexing (non-PPP Encapsulation)

For VC-based multiplexing, by prior agreement, a protocol is assigned a specific virtual
circuit, for example, VC1 will carry IP. Separate VPI and VCI numbers must be specified for
each protocol.
151
Menu 21.12 - Filter Rules Summary
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=21
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=69
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=80
Enter Filter Rule Number (1-6) to Configure
Note: Do not edit filter sets 11 and 12. They are used
exclusively by the web configurator. Any rules you configured in
sets 11 and 12 will be erased and replaced when you apply the
web configurator-generated filter rules.
Filter Rules
Chapter 18 Remote Node Configuration
M m n
N D N
N D N
N D N
N D N