Connecting Serial Ata Cables - Zotac nForce 620i Value User Manual

Connecting Serial ATA Cables(SATA-1, SATA-4 Optional)
The Serial ATA II connector is used to connect the Serial ATA II device to the
motherboard. These connectors support the thin Serial ATA II cables for primary
storage devices. The current Serial ATA II interface allows up to 3Gb/s data transfer
rate.
There are four serial ATA connectors on the motherboard that support AHCI and RAID
configurations.
SATA-/SATA-/SATA3/SATA4- Pin Definition
PIN SIGNAL
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
1
1
1
1
7