Connecting Serial Ata Cables; Fan Connections - Zotac G31 series User Manual

Intel G31 Motherboard
Connecting Serial ATA Cables(SATA-1~SATA-4 Optional)
The Serial ATA II connector is used to connect the Serial ATA II device to the
motherboard. These connectors support the thin Serial ATA II cables for primary
storage devices. The current Serial ATA II interface allows up to 3GB/S data transfer
rate.
SATA-~SATA-4-Pin Definition
PIN SIGNAL
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND

Fan Connections

There are two fan connections on the motherboard.
The fan speed can be detected and viewed in the
PC Health Status section of the CMOS Setup.
8
SATA-1 SATA-2 SATA-3 SATA-4
SYS FAN Connector
CPU FAN Connector
GND
+12V
Sense
Control
GND
+12V
Sense
R E M O E V