Showing The Master Fader Setting - Zoom MRS-802 Supplemental Manual

Showing the master fader setting

The MRS-802 Version 2.0 can show the [MASTER] fader settings on the display when the fader is being operated while
playing an audio CD or a playlist using the sequence play function.
1.
Perform playback of an audio CD inserted
in the CD-R/RW drive or of a playlist.
For example, when you play a playlist, the display
changes as follows.
PLAY PLAY
PRJ001 PRJ001
2.
Operate the [MASTER] fader.
The playback volume changes and the [MASTER] fader
setting is shown within the range of 0 - 127.
PLAY PLAY
VOLUME VOLUME
Two seconds after you stop moving the [MASTER] fader,
the display of step 1 appears again.
NOTE
• If analog playback is selected as audio CD playback method
(headphone output of CD-R/RW drive is active), operating the
[MASTER] fader has no effect.
• The above operation does not change the [MASTER] fader
setting value stored as part of the project.
ZOOM MRS-802 Ver 2.0
1 1
100
11