Setting tracks for output as MASTER and CLICK signals.
Set the output destination of each track.
By setting rhythm tracks, for example, to CLICK, they can be used like a click during recording, synchronized
performances and other situations.
1.
Tap the Output Routing □ boxes on the Project Settings Screen (→
project settings can be
Set the output destination for each track to MASTER or CLICK.
• MASTER: The sound is output from both the OUTPUT and PHONES jacks.
• CLICK: The sound is output only from the PHONES jack, and the volume balance between the
MASTER and CLICK output signals can be adjusted.
NOTE:
Set
to PHONES to output the CLICK signal from the PHONES jack, and use
volume balance with the MASTER output.
made).
Opening the screen where various
47
to adjust the