Zoom MRS-802 Supplemental Manual page 5

7.
Turn the dial to select the next project to
play.
Use the same procedure to select projects for subsequent
positions.
A maximum of 99 projects can be registered in a playlist.
●
To change projects in a playlist
Use the cursor left/right keys to select the playback
number for which you want to change the project, and
use the dial to select another project.
●
To insert a project in a playlist
Use the cursor left/right keys to select the playback
number where you want to insert a project. Press the
[INSERT/COPY] key in the control section. The
indication "INSERT?" appears on the display. In this
condition, use the dial to select another project, and
press the [ENTER] key. (Subsequent projects are
renumbered.)
●
To delete a project from a playlist
Use the cursor left/right keys to select the playback
number you want to delete. Press the [DELETE/
ERASE] key in the control section. The indication
"DELETE SURE?" appears on the display. To delete
the project from the playlist, press the [ENTER] key.
(Subsequent projects are renumbered.)
●
To delete all projects from a playlist
On the playlist registration screen, press the
[DELETE/ERASE] key in the control section and then
the cursor down key. The indication "ALL DEL
SURE?" appears on the display. To delete all projects
from the playlist, press the [ENTER] key.
●
To switch the V-take for the master track
Press the [EXIT] key repeatedly to return to the main
screen. Load the project for which you want to switch
the V-take, and select the V-take for the master track.
Then return to the playlist registration screen.
ZOOM MRS-802 Ver 2.0
Continuous project playback (sequence play function)
8.
When you have registered all desired
projects in the playlist, press the [EXIT] key
several times to return to the main screen.
HINT
The playlist contents are stored automatically.
NOTE
If the master track data for projects included in a playlist have
been deleted from the hard disk, the playlist returns to the
blank state.
5