Including A Playlist In An Album - Zoom MRS-802 Supplemental Manual

Creating a CD using the disc-at-once method
previous condition. The marker enable/disable selection
can be made at any time while the album screen is shown.
If the mark function is enabled for the project registered
as track 1 of the audio CD, the following indication
appears.
PRJ001 PRJ001
PROJ001 PROJ001
436120
When you divide a project, the number of tracks on the
album will increase, and tracks corresponding to
subsequent projects will be renumbered.
For example four marks are set for the project, the tracks
on the audio CD will be allocated as follows.
Project 1
(marker-based separation
enabled)
Audio CD
track
Track 1 Track 2 Track 3
numbers
The subsequent steps for creating the audio CD are as
described in the previous section.
NOTE
• If the tracks have not been separated as expected, press the
[EXIT] key repeatedly to return to the main screen, and check
whether marker information has been created properly for the
project.
• If marks are too close together, the indication "Track Is Short"
appears on the display, and marker-based separation cannot
be enabled for that project.
• The maximum number of tracks per album is 99. If you
attempt to enable marker-based separation for a project and
this causes the number of tracks to exceed 99, the indication
"Too Many Track" appears, and marker-based separation
cannot be enabled.
10
1
Project 2
(marker-based
separation disabled)
Track 4 Track 5

Including a playlist in an album

The MRS-802 version 2.0 lets you register the master
tracks of multiple projects in a list (playlist) for
continuous playback in a sequence ( → P.4). It is possible
to include playlist information when creating an audio
CD by album.
HINT
You can create up to ten playlists, but only one can be
included in an album.
1.
Perform steps 1 - 6 of "Creating an audio
CD by album", and bring up the album
screen on the display.
END OF END OF
PROJECT PROJECT
0 0
2.
Press the [UTILITY] key in the display
section.
The display indication changes as follows. In this
condition, you can select the playlist (1 - 10) to include in
the album.
IMPORT IMPORT
PlayList PlayList
3.
Turn the dial to select the playlist, and press
the [ENTER] key.
The indication "IMPORT SURE?" appears on the
display.
IMPORT IMPORT
SURE? SURE?
4.
To import the playlist information, press the
[ENTER] key.
The procedure is carried out, and the album screen
returns.
HINT
After importing playlist information, you can edit the album
as normal.
1
0
1
Playlist number
ZOOM MRS-802 Ver 2.0